Waterproof Hybrid Stepper Motors
IP65
Our IP65-rated motors guarantee perfect operation in the presence of dust and can withstand low-pressure water jets (from all directions) over a long period of time.
Protection is complete even in environments with very harsh climatic conditions. In addition, our IP65 motors have a special coating that makes them ideal for all washing cycles typical of food industry applications.
Plus
- IP65
- Water resistance
- Dust resistance
- NEMA sizes 17 – 23 – 24 – 34
- The motors are highly customisable for every application requirement
- Customisation available for wiring, shaft, winding, bearings, etc.
- Possibility of combining ENCODER, REDUCER, BRAKE, DRIVE
1 – Dustproof & Water resistant
Our IP65-rated stepper motors are components intended for machine manufacturers who will have to operate in harsh environmental conditions.
The applications that can benefit from IP65-rated motors are diverse: in the packaging sector, for example, forming machines, filling machines that dispense and seal product; in the medical sector, liquid dispensing and pumping applications; in the machine tool sector with water or laser cutting systems, and many more.
2 – Dustproof & Water resistant – tested
To obtain an IP65 rating, a component must withstand water jets from nozzles up to 30 kPa and must also withstand a sealed chamber filled with fine dust.
However, one must always remember to pay close attention to the needs of the application for which IP65 motors are to be used, as additional protection may be required to ensure the correct functionality of the component.
3 – Customisation: Connection systems
You can choose between different types of connection; our motors can be fitted with an on-board connector or have outgoing cables of any length, with or without connector. The information below refers to STANDARD products, if you do not find the ideal configuration please contact us, all our components are customisable!
4 – Customisations: Drive shaft
You can request customisations for the crankshaft and any pulley or gear. You can choose the MATERIAL, LENGTH and DIAMETER of the shaft. There are many possible configurations, for example the shaft can be: Cross-drilled – Single flat – Double flat – Keyed – Knurled – Notched – Hollow or with specific pulleys or sprockets. Want to know more?
5 – Customisations: Encoders, Reducers, Brakes and Drives
We do not sell components, we provide SOLUTIONS. Our stepper motors can be customised according to your needs; an ENCODER, a REDUCER, a BRAKE or a DRIVE can be fitted (versions with electronics already integrated in the motor are also available, visit the page). If you have a specific requirement, do not hesitate to contact us!
6 – Need support? Contact our expert!
Our technical staff is highly specialised and has specific experience in various application areas. If you are interested in our standard stepper motors, please contact our Senior Sales Manager Fabio Baccilieri, together we will find the best solution for your automation and motion control needs.
IP65 – Waterproof Hybrid Stepper Motors
AM series IP65 stepper motors are the recommended models for MOONS’ stepper drivers, which is completely dust-proof and prevents the intrusion of sprayed water.
- Step Angle: 1.8°
- NEMA 23 – 24 – 34
- IP Rating 65
STEPPER MOTOR - HYBRID - WATERPROOF - IP65
wdt_ID | FRAME SIZE | LENGHT (mm) | STEP ANGLE | RATED CURRENT (A) | HOLDING TORQUE (Nm) | TORQUE CURVES | CONNECTION [plug - cable] | ROTOR INERTIA (g - cm²) | WEIGHT (kg) | CODE | DATA SHEET | 3D DRAWING |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | NEMA23 - 56mm | 61,70 | 1,8 | 3,70 | 1,25 | ![]() |
Lead Type | 260,00 | 0,60 | AM23HS2450-03 | Download PDF | Download 3D |
2 | NEMA23 - 56mm | 83,70 | 1,8 | 3,70 | 2,20 | ![]() |
Lead Type | 460,00 | 1,00 | AM23HS3455-05 | Download PDF | Download 3D |
3 | NEMA24 - 60mm | 94,50 | 1,8 | 4,00 | 3,20 | ![]() |
Lead Type | 900,00 | 1,40 | AM24HS5401-44N | Download PDF | Download 3D |
4 | NEMA34 - 86mm | 98,00 | 1,8 | 6,30 | 6,70 | ![]() |
Lead Type | 1850,00 | 2,70 | AM34HD1404-13 | Download PDF | Download 3D |
5 | NEMA34 - 86mm | 127,50 | 1,8 | 5,60 | 9,40 | ![]() |
Lead Type | 2750,00 | 3,80 | AM34HD2403-13 | Download PDF | Download 3D |