Stepper Drives

The drives for MOONS’ stepper motors represent the most avant-garde technology available today and the best choice to drive stepper motors. The drives offer several control modalities; for example position, speed or torque control. All that is needed to manage movement precision as best as possible.

These drives offer the best current, smoothness and optimal torque control in this category, flexible control options on board and standard industrial network communications in the sector.

STEPPER motors drives

  • Fieldbus DC –STF series
  • 2 Phase DC – ST series
  • 2 Phase AC – STAC series
  • 2 Phase DC – SR series
  • 2 Phase AC – SRAC series
  • For combinable stepper motors, see page AM STEPPER Motors series

Applications:

STF Series Fieldbus Control DC Stepper Drives

The drives can be controlled by SCL, Modbus, CANopen, eSCL, EtherNet/IP or EtherCAT in real time. Motion profiles can also be programmed and stored in the drives (Q Program) and then be activated by fieldbus commands.

  • Host Control
  • Stand-Alone Programmable
  • Flexible interface
  • Anti-Resonance
  • Torque Ripple Smoothing
  • Auto Setup & Self Test

Azionamenti per STEPPER - STF

wdt_ID Supply Voltage(V) SINE Peak Output Current (A) Control Modes Communication Ports Encoder Feedback CODE User Manual Software
1 12-48 VDC 0,1-3,0 CANopen, Q Programming Dual CANopen, RS-232 NO STF03-C PRODUCT MANUAL PRODUCT SOFTWARE
2 12-48 VDC 0,1-3,0 eSCL, Q Programming, Modbus/TCP Dual Ethernet NO STF03-D PRODUCT MANUAL PRODUCT SOFTWARE
3 12-48 VDC 0,1-3,0 EtherCAT, Q Programming Dual EtherCAT, RS-232 NO STF03-EC PRODUCT MANUAL PRODUCT SOFTWARE
4 12-48 VDC 0,1-3,0 EtherNet/IP, Q Programming Dual EtherNet/IP NO STF03-IP PRODUCT MANUAL PRODUCT SOFTWARE
5 12-48 VDC 0,1-3,0 SCL, Q Programming, Modbus/RTU Dual RS-485 NO STF03-R PRODUCT MANUAL PRODUCT SOFTWARE
6 24-48 VDC 0,1-5,0 CANopen, Q Programming Dual CANopen, RS-232 NO STF05-C PRODUCT MANUAL PRODUCT SOFTWARE
7 24-48 VDC 0,1-5,0 eSCL, Q Programming, Modbus/TCP Dual Ethernet NO STF05-D PRODUCT MANUAL PRODUCT SOFTWARE
8 24-48 VDC 0,1-5,0 EtherCAT, Q Programming Dual EtherCAT, RS-232 NO STF05-EC PRODUCT MANUAL PRODUCT SOFTWARE
9 24-48 VDC 0,1-5,0 EtherNet/IP, Q Programming Dual EtherNet/IP NO STF05-IP PRODUCT MANUAL PRODUCT SOFTWARE
10 24-48 VDC 0,1-5,0 SCL, Q Programming, Modbus/RTU Dual RS-485 NO STF05-R PRODUCT MANUAL PRODUCT SOFTWARE
Supply Voltage(V) SINE Peak Output Current (A) Encoder Feedback

ST Series Two Phase DC Stepper Motor Drives

The ST series integrate motion control capability that support stand-alone programming and various bus control as RS-232/485, Ethernet UDP/TCP, CANopen and EtherNet/IPtle

  • Anti-Resonance
  • Microstep Emulation
  • Torque Ripple Smoothing
  • Stall detection & Stall prevention

Azionamenti per STEPPER - ST

wdt_ID Supply Voltage(V) SINE Peak Output Current (A) Control Modes Communication Ports Encoder Feedback CODE User Manual Software
1 24-80VDC 0,1-10 CANopen, Q Programming CANopen, RS-232 YES MSST10-C-CE PRODUCT MANUAL PRODUCT SOFTWARE
2 24-80VDC 0,1-10 CANopen, Q Programming CANopen, RS-232 NO MSST10-C-CN PRODUCT MANUAL PRODUCT SOFTWARE
3 24-80VDC 0,1-10 Analog Position/Velocity, Velocity Mode, , EtherNet/IP, Q Programming EtherNet/IP YES MSST10-IP-EE PRODUCT MANUAL PRODUCT SOFTWARE
4 24-80VDC 0,1-10 Analog Position/Velocity, Velocity Mode , , EtherNet/IP, Q Programming EtherNet/IP NO MSST10-IP-EN PRODUCT MANUAL PRODUCT SOFTWARE
5 24-80VDC 0,1-10 Pulse Mode, Analog Position/Velocity, , Velocity Mode, SCL, Q Programming RS-232 YES MSST10-Q-AE PRODUCT MANUAL PRODUCT SOFTWARE
6 24-80VDC 0,1-10 Pulse Mode, Analog Position/Velocity, , Velocity Mode, SCL, Q Programming RS-232 NO MSST10-Q-AN PRODUCT MANUAL PRODUCT SOFTWARE
7 24-80VDC 0,1-10 Pulse Mode, Analog Position/Velocity, , Velocity Mode, eSCL, Modbus TCP, , Q Programming Ethernet YES MSST10-Q-EE PRODUCT MANUAL PRODUCT SOFTWARE
8 24-80VDC 0,1-10 Pulse Mode, Analog Position/Velocity, , Velocity Mode, eSCL, Modbus TCP, , Q Programming Ethernet NO MSST10-Q-EN PRODUCT MANUAL PRODUCT SOFTWARE
9 24-80VDC 0,1-10 Pulse Mode, Analog Position/Velocity, , Velocity Mode, SCL, Modbus RTU, , Q Programming RS-485, RS-232 YES MSST10-Q-RE PRODUCT MANUAL PRODUCT SOFTWARE
10 24-80VDC 0,1-10 Pulse Mode, Analog Position/Velocity, , Velocity Mode, SCL, Modbus RTU, , Q Programming RS-485, RS-232 NO MSST10-Q-RN PRODUCT MANUAL PRODUCT SOFTWARE
Supply Voltage(V) SINE Peak Output Current (A) Encoder Feedback

SR Series Two Phase DC Stepper Motor Drives

DC Input, DIP and Rotary Switch setting, Pulse & Direction Control Drive

  • Advanced Current Control
  • Torque Ripple Smoothing
  • Anti-Resonance
  • Microstep Emulation

Azionamenti per STEPPER - SR

wdt_ID Supply Voltage(V) SINE Peak Output Current (A) Control Modes Communication Ports Encoder Feedback CODE User Manual Software
1 12-48 VDC 0,3-2,2 Pulse Mode NO SR2-Plus PRODUCT MANUAL PRODUCT SOFTWARE
2 12-48 VDC 0,4-3 Pulse Mode NO SR3-mini PRODUCT MANUAL PRODUCT SOFTWARE
3 24-48 VDC 1-4,5 Pulse Mode NO SR4-Plus PRODUCT MANUAL PRODUCT SOFTWARE
4 24-75 VDC 2,4-7,8 Pulse Mode NO SR8-Plus PRODUCT MANUAL PRODUCT SOFTWARE
Supply Voltage(V) SINE Peak Output Current (A) Encoder Feedback

SRAC Series Two Phase AC Stepper Motor Drives

DC Input, DIP and Rotary Switch setting, Pulse & Direction Control Drive

  • Advanced Current Control
  • Torque Ripple Smoothing
  • Anti-Resonance
  • Microstep Emulation

Azionamenti per STEPPER - SRAC

wdt_ID Supply Voltage(V) SINE Peak Output Current (A) Control Modes Communication Ports Encoder Feedback CODE User Manual Software
1 80-265 VAC 0,6-2,5 Pulse Mode NO SRAC2 PRODUCT MANUAL PRODUCT SOFTWARE
2 80-265 VAC 0,4-4 Pulse Mode NO SRAC4 PRODUCT MANUAL PRODUCT SOFTWARE
3 80-265 VAC 0,4-8 Pulse Mode NO SRAC8 PRODUCT MANUAL PRODUCT SOFTWARE
Supply Voltage(V) SINE Peak Output Current (A) Encoder Feedback

STAC Series Two Phase AC Stepper Motor Drives

The ST series integrate motion control capability that support stand-alone programming and various bus control as RS-232/485, Ethernet UDP/TCP, CANopen and EtherNet/IPtle

  • Anti-Resonance
  • Microstep Emulation
  • Torque Ripple Smoothing
  • Stall detection & Stall prevention

Azionamenti per STEPPER - STAC

wdt_ID Supply Voltage(V) SINE Peak Output Current (A) Control Modes Communication Ports Encoder Feedback CODE User Manual Software
1 94-265VAC 0,5-2,55 Basic Type RS-232 NO MSSTAC5-S-AN-2V PRODUCT MANUAL PRODUCT SOFTWARE
2 94-265VAC 0,5-2,55 Basic Type Encoder, RS-232 YES MSSTAC5-S-AE-2V PRODUCT MANUAL PRODUCT SOFTWARE
3 94-265VAC 0,5-2,55 Basic Type RS-485 NO MSSTAC5-S-RN-2V PRODUCT MANUAL PRODUCT SOFTWARE
4 94-265VAC 0,5-2,55 Basic Type Encoder, RS-485 YES MSSTAC5-S-RE-2V PRODUCT MANUAL PRODUCT SOFTWARE
5 94-265VAC 0,5-2,55 Basic Type Ethernet NO MSSTAC5-S-N-2V PRODUCT MANUAL PRODUCT SOFTWARE
6 94-265VAC 0,5-2,55 Basic Type Encoder, Ethernet YES MSSTAC5-S-E-2V PRODUCT MANUAL PRODUCT SOFTWARE
7 94-265VAC 0,5-2,55 Q programmer Type RS-232, Expanded I/O NO MSSTAC5-Q-AN-2V PRODUCT MANUAL PRODUCT SOFTWARE
8 94-265VAC 0,5-2,55 Q programmer Type Encoder, RS-232, Expanded I/O YES MSSTAC5-Q-AE-2V PRODUCT MANUAL PRODUCT SOFTWARE
9 94-265VAC 0,5-2,55 Q programmer Type RS-485 NO MSSTAC5-Q-RN-2V PRODUCT MANUAL PRODUCT SOFTWARE
10 94-265VAC 0,5-2,55 Q programmer Type Encoder, RS-485 YES MSSTAC5-Q-RE-2V PRODUCT MANUAL PRODUCT SOFTWARE
Supply Voltage(V) SINE Peak Output Current (A) Encoder Feedback

Do you want to find your solution?

Phone, write an e-mail, start a conversation. Our staff are always available.